Boynton Beach, FL

Generator has been maintenance generator is running and operating properly

I am a highly skilled and experienced home service professional. I recently completed a service call and wanted to share the details of the job with you. The service call fee was $75, which was absorbed into the cost if the estimate was approved. This fee was charged to cover the technician's time and expertise in diagnosing the issue and providing a solution. During the service call, the technician assessed the problem, identified the root cause, and provided a detailed estimate for the necessary repairs. The customer approved the estimate, and the service call fee was included in the overall cost. The technician's expertise and professionalism were evident throughout the process, and the customer was satisfied with the solution provided. Overall, the service call experience was positive, and the customer was pleased with the quality of work and the technician's professionalism.

I recently completed a job where a customer's HVAC system thermostat battery had died and needed to be replaced. This was a crucial step in ensuring that the system would continue to function correctly and provide the customer with the necessary heating and cooling. By replacing the thermostat battery, I restored the system's functionality and ensured the customer remained comfortable in their home.

Remove and replace gypsy outlet after which power was restored to all additional outlets. Customer said he will talk with property owner about moving forward with three phase. Surge protector

Worked on a 3 1/2 ton rheem unit did basic maintenance on it found the unit had a dirty coil did an in place coil claim checked all electrical values cleaned evaporator tray, lines put allergy pills and tray clean squirrel cage clean grills return clean coil units up and running customer I believe is happy

Indoor panel main lug 200a corrosion Outdoor main breaker 200a corrosion Surge protector

I replaced the indoor main lug panel, the outdoor main breaker, and the AC disconnect and added two ground rods. I also installed a surge protector and replaced a bad GFI in the kitchen.

I installed a 200 amp grounding wire in the location provided. The wire was run underground to a grounding rod and secured with a grounding clamp. The grounding rod was then driven into the ground and secured with a grounding stake.

Air conditioning maintenance Delray Beach

TRAINING

INVOICE ONLY

Troubleshoot switches to make sure is working

Remove existing (FPE) indoor electrical panel and replace with new up to code. 5 year warranty on breakers lifetime on panel.

Replace exit sign Replace timer on roof need 20 foot ladder to access I can’t access

Metal flex with a change over emt to metal flex 3 circuits Junction box to protect expose wires Fridge dedicated line

Meeting

Did maintenance on a 3 1/2 ton Rheem package unit

Provided estimates to customer.

After thoroughly going through each light connected connected to low voltage, transformer timer, I was able to determine that one light has been damaged and the reason for transformer shorting out after removing and spacing is working properly.

estimate to replace electrical panels

Grounding water bond with 2 grounding rods in to the electrical panel with #8 copper

200 Amps Meter can, riser, surge, and grounding feeders ( KEEP INSIDE PANEL INTO 125A) Inside panel wire is only 60 amps (enough for a stove) and is running the whole home. Against code. Need feeder pipe and copper is needed to inside panel.

Installed Halo light unit 1 got data plate on three units AC water heater

D&L transport hired another company Bosch electric when I got here they were working on it. Charging Dispatch fee for travel time. Customer called when technician was already onsite.

Did a thorough inspection of generator and was able to determine that generator needed a new starter solenoid removed and replace starter solenoid paper and solenoid in hand and going to hand to Chris